Lancia THESIS CONNECT Owner's Manual page 11

– TRIP key = On-board computer
– • key = Targasys services
– SETUP key = System settings
– SOS key = Assistance services
and functions.
For each operating mode the corre-
sponding menu is shown on the dis-
play.
Multifunction keys
At the base of the CONNECT dis-
play there are six double keys whose
function depends on the system
operating condition active, which is
shown on the display.
The function corresponding to each
"multifunction" key is identified
each time by a label displayed on the
screen next to the relevant key.
In certain cases a label covers some
adjacent keys: the function of all
these keys will be the same.
10
CHOOSING THE MENU
FUNCTIONS
The different operating modes of
the CONNECT allow access to dif-
ferent menus, with functions that in
turn show other submenus on the
display and so on. The procedures
for choosing and confirming the
functions of the different menus and
submenus are however the same and
they are described below.
To go back to the previous screen
from a submenu or to quit the vari-
ous operating modes, press the ESC
key.
Choosing and confirming a
function
To select a function of the menu on
the display, simply turn the right
knob in one of the two directions
until showing the function required.
To confirm the function selected,
press the right knob.
The knob enables to scroll quickly
long lists or the alphabet to enter
names; to speed up scrolling simply
turn the knob fast or slow as
required.
IMPORTANT On the menu or
submenu pages showing "OK", to
store the new settings or the modi-
fied parameters it is necessary to exit
the corresponding screen confirming
"OK". Leaving the page of the
menu or submenu with the ESC key,
the previous settings are restored.