On-Board Computer (Trip) - Setup - Lancia THESIS CONNECT Owner's Manual

ON-BOARD COMPUTER (TRIP) – SETUP
ON-BOARD
COMPUTER (TRIP)
To access the on-board computer
screen press the TRIP key 10 (fig. 1).
The on-board computer provides a
series of helpful data relating to the
operating status of the car. The sys-
tem features two different trip data
functions, a general one ("contin-
ued") and a partial one ("since
hh:mm").
The "continued" option provides
travel info calculated starting from
the last manual computer reset.
"Since hh:mm" option provides
travel info calculated starting from
the last manual computer reset or au-
tomatically when at least 2 hours have
passed since stopping the engine (ig-
nition key to STOP).
132
To reset the on-board computer
manually press the "Reset" multi-
function key.
Data can be reset in the following
two ways:
– "Reset since hh:mm" option: par-
tial data calculation ("since hh:mm")
restarts from reset;
– "Reset trip data" option: both data
calculations ("since hh:mm" and
"continued") restart from reset.
Automatic reset of both options
takes place in one of the following
conditions:
– after 5000 km;
– travel time exceeds 100 hours;
– battery is disconnected.
IMPORTANT Automatic reset will
reset also the partial trip data.
The options available are the fol-
lowing (fig. 89):
– Travel time
– Distance covered
– Consumption & Range
– Speed & Limit
– Historical data
– Data to destination.
fig. 89