Lancia THESIS CONNECT Owner's Manual page 45

"BLANK SKIP" FUNCTION
The "Blank skip" function is used to
eliminate the blank spaces between a
track and the other. When playing a
tape with this function on, at the end
of a track the next one is played au-
tomatically.
To turn this function on, select and
confirm it wit the right knob 21 (fig.
1). When the function is on, symbol
" " appears in the small square near
the wording.
44
"SETTINGS" FUNCTION
(audio parameters setting)
(fig. 25)
To set audio parameters, select and
confirm the "Settings" function with
the right knob 21 (fig. 1) to display
the relevant menu, then follow the in-
structions given in paragraph "Audio
settings".
fig. 25
CHANGING THE TAPE
PLAYING SIDE
Insert the cassette in the slot 3 (fig.
1) with the tape facing rightwards,
the tape starts playing automatically.
To change side before the end of the
tape, press key 25 (fig. 1) or the mul-
tifunction key "Side A/B". After play-
ing a tape, the cassette side is changed
automatically ("Autoreverse" func-
tion). The display shows the side of
the cassette that is being played (side
A or B).
If the cassette is already inserted, se-
lecting "CASSETTE" with the SRC
key 12 (fig. 1) or the multifunction
key will start playing from the last
side played.