Lancia THESIS CONNECT Owner's Manual page 40

To change the type of PTY pro-
gramme, press the keys 6 or 7 (fig. 1)
or one of the 6 preset keys. If the dis-
play shows the frequency or station
name, pressing the keys 6 or 7 (fig. 1)
the type of current programme will be
shown.
To store the current programme
type on one of the 6 preset keys, press
the preset key at length (over 2 sec-
onds).
To seek a station with PTY pro-
gramme proceed as follows:
– select an FM band with the SRC
key 12 (fig. 1);
– set the PTY programme type;
– press key 6 or 7 (fig. 1) to start the
automatic search for tuning the next
station that can be received in the di-
rection chosen, respectively lowering
or highering the frequency. The tuner
will only seek PTY stations.
If no station is available with this
type of programme, the station se-
lected previously is returned and for
about 2 seconds the display will show
"NO-PTY".
To exit the screen with the list of
PTY programmes, choose a type of
programme, or "None" if you do not
wish to set a programme type.
"AUTOSTORE" FUNCTION
(automatic station storage)
To turn on the "Autostore" function
(automatic station storage), select and
confirm it with the right knob 21
(fig. 1).
When this function is on, the radio
automatically stores the 6 stations with
the strongest signal, in decreasing or-
der of intensity of the signal in the
FM3-AS frequency band.
If the "TP" function (traffic informa-
tion) is on, only stations that broadcast
traffic information will be stored. This
function can be turned on also when
playing a cassette or a CD.
During automatic storage the dis-
play shows the wording "Search in
Progress". To interrupt the automatic
storage process, turn off the "Auto-
store" function pressing the ESC key
23 (fig. 1); the radio will tune to the
station heard previously before the
function was activated.
39