Table of Contents
Advertisement
"Language"
This option makes it possible to set
the CONNECT language for the mes-
sages/functions shown on the display
and for the voice command dialogs; it
is only possible to set one language.
Languages available are the follow-
ing:
– D (German)
– GB (English UK)
– USA (English US)
– E (Spanish)
– F (French)
– I (Italian).
To change language, select and con-
firm it with the right knob 21 (fig. 1).
Press "Cancel" to quit without stor-
ing the new setting.
IMPORTANT To change the lan-
guage the system requires, through a
message on the display, the SETUP
CD (versions without navigation sys-
tem) or the navigation CD.
If the required CD is not inserted the
language will not be changed. The lan-
guage change could take a few min-
utes, during this period certain CON-
NECT functions may not be available;
in this condition the display will show
a dedicated warning message.
If the CD is not inserted, the display
will show the following message:
"Please insert Setup CD!" or "Please
insert Navi CD! " (system fitted with
navigation function).
Should the inserted CD be not rec-
ognized or be unsuitable for language
change, the display will show a dedi-
cated warning message.
When starting the language change
procedure, the system requires the
user's confirmation through a dedi-
cated message, press "Yes" to con-
tinue otherwise press "No". During
language change the status bar (indi-
cating that the procedure is in
progress) together with message
"Please wait! Language change in
progress ..." are displayed.
This message will stay on until the
procedure is over then the system goes
back to the screen used to enter the
new setting. New language setting re-
mains active also after switching the
system off.
"Temperature"
The temperature units are the fol-
lowing:
– °C (Celsius degrees)
– °F (Fahrenheit degrees).
To change the temperature unit, se-
lect and confirm it with the right knob
21 (fig. 1), then press the "Store"
key. Press "Cancel" to quit without
storing the new setting.
"Pictogram on MAIN"
This option makes it possible to ac-
tivate or deactivate the navigation
function symbols (arrow representing
the car, next manoeuvres, etc.) on the
MAIN screen.
To turn the option on/off, select and
confirm it with the right knob 21 (fig.
1).
145
Hide quick links:
Advertisement
Table of Contents
