Lancia THESIS CONNECT Owner's Manual page 41

On preset keys (1), (2), (3), (4), (5),
(6) the stations that have a strong sig-
nal in that moment will be stored, in
the FM3-AS band. After storage the
radio tunes automatically to the first
station of the FM3-AS band corre-
sponding to the frequency stored on
preset key (1).
Every station is stored only once, ex-
cept in the case of regional pro-
grammes, which in certain cases
might be stored twice.
The behaviour of the set during
"Autostore" is as follows:
– at the beginning of the "Autostore"
function all the other functions are
disabled;
– any change in volume is not shown
on the display;
– pressing one of the preset keys
from "1" to "6" the automatic stor-
age process is interrupted and the sta-
tion stored with that key is tuned;
– selecting and activating a radio
function (e.g. "PTY") the automatic
storage process is interrupted, the last
station heard before tuning on "Au-
40
tostore" is tuned and the function as-
sociated with the key pressed is run;
– selecting and activating one or
both "TP" and "AF" functions dur-
ing the automatic storage process, au-
tomatic storage will be interrupted,
the "TP" (traffic information) and
"AF" (alternative frequencies) func-
tions will be turned on/off and a new
automatic storage process will be
started;
– changing the audio source (Cas-
sette, CD or CD-Changer) during the
automatic storage process, the "Auto-
store" function is not interrupted.
IMPORTANT It may occur that the
Autostore function is unable to find 6
stations with a strong signal; in this
case only the stations found are
stored.
"FREQUENCY" FUNCTION
(tuning stations) (fig. 22)
Manual tuning
This allows manual station search-
ing in the chosen band.
Proceed as follows:
– select the frequency band (FM1,
FM2, FM3-AS, MW or LW) with the
SRC key 12 (fig. 1) or the multifunc-
tion keys;
– turn the right knob 21 (fig. 1)
right or left to start the manual
search for the higher or lower fre-
quency.
fig. 22