Table of Contents
Advertisement
MAP REPRESENTATION
Pressing the MAP key 20 (fig. 1) it
is possible to display the map screen,
where the car is shown with an arrow
with the tip pointing in the direction of
travel (fig. 86). The destination to be
reached is shown by a red cross while
the items of the route: roads, rivers,
railway lines are shown with coloured
lines.
Use the mltifunction keys to activate
the following options:
– Atlas
¯
˙
– Route
and Route
– Zoom + and Zoom –
– Options.
fig. 86
Press the "Atlas" multifunction key
to move the cursor on the map fol-
lowing the procedure described in the
following paragraphs.
The multifunction keys "Route
˙
and "Route
" shall be used to move
the cursor along the calculated route, re-
spectively towards the start and towards
the destination; these keys are active
only if the route has been calculated.
Multifunction keys "Zoom +" and
"Zoom –" shall be used to enlarge
and reduce the visible area of the
map. The map scale is shown at the
bottom of the display on the left-hand
side.
Scales available are: 50 m, 100 m,
200 m, 500 m, 1 km, 2 km, 5 km, 10
km, 20 km, 50 km, 100 km, 200 km
and 500 km. To enlarge or reduce the
map you can also use the right knob
turning it respectively counterclock-
wise and clockwise.
The "Options" multifunction key
displays the menu for map options as
described in the following paragraphs.
"ATLAS" FUNCTION
The "Atlas" function (fig. 87)
makes it possible to move through the
map by the selectable sections using
the multifunction keys; key options
are the following:
– Multifunction key 1 = to move sec-
¯
"
tion "1" to the centre of the display
– Multifunction key 2 = to move sec-
tion "2" to the centre of the display
– Multifunction key 3 = to move sec-
tion "3" to the centre of the display
– Multifunction key 4 = to move sec-
tion "4" to the centre of the display
fig. 87
101
Hide quick links:
Advertisement
Table of Contents
