Lancia THESIS CONNECT Owner's Manual page 17

CONTROLS ON STEERING
WHEEL (fig. 2)
The main functions of the CON-
NECT are repeated on the steering
wheel, which facilitates control.
On the steering wheel there is also
the VOICE key used for turning
on/off the voice commands of the au-
dio/phone/navigator system and for
recording short voice messages.
Control functions are the following:
A – Voice recognition key:
– voice recognition on/off: brief
press
– voice message storage: pro-
longed press
– voice recorder stop: brief press
fig. 2
16
B – Audio source select key: FM1,
FM2, FM3-AS, MW, LW, CC,
CD, CDC, TV
C – Volume lowering key
D – Volume highering key
E – Radio mode: seeking the first
station that can be tuned with
higher frequency
Cassette mode: fast tape forward
to next track
CD/CDC mode: select next track
TV mode: seeking the first
channel that can be tuned with
higher frequency
F – Radio mode: seeking the first
station that can be tuned with
lower frequency
Cassette mode: fast tape rewind
to previous track
CD/CDC mode: select previous
track
TV mode: seeking the first
channel that can be tuned with
lower frequency
G – Cyclic selection of main screens:
MAIN – AUDIO – TRIP – SETUP –
TEL – NAV – CONNECT (Targasys
services)
H – Phone key:
– accepting the incoming call:
brief press
– ending the call in progress:
brief press
– to display the last dialled
number: brief press
– forwarding the call set: brief
press
– reading the last SMS received:
brief press
– refusing the incoming call:
long press
L – Key for scrolling the screen up-
wards and select functions
M –Key for confirming selected
function
N – Key for scrolling the screen
downwards and select functions