Lancia THESIS CONNECT Owner's Manual page 135

"CONSUMPTION & RANGE"
FUNCTION
This function shows on the left-hand
side of the display (fig. 90) the aver-
age consumption, the current con-
sumption and the range for km K.
The average consumption values are
calculated from the last manual (since
"hh:mm") and automatic ("contin-
ued") reset of the on-board computer.
The average consumption indicates
the average consumption values cal-
culated from the last reset. The aver-
age consumption value is obtained by
dividing the distance covered by the
fuel. At starting the on-board com-
puter shows the last value measured
before turning off.
fig. 90
134
The value is expressed in "km/l"
(km covered with 1 litre fuel) or in
"l/100km " (fuel litres per 100 km),
with an accuracy of 0.1 km/l. The
value is updated every 10 seconds or
every 0.1 km, depending on the first
value reached.
The current consumption value in-
dicates the fuel consumption of the
car when travelling and it is therefore
helpful to learn the fuel consumption
in relation to the driving style
adopted. This value is the same with
both on-board computer functions
(manual or automatic reset) and is
displayed 10 seconds after the engine
is started or the on-board computer is
reset.
The value is expressed in "km/l"
(km covered with 1 litre fuel) or in
"l/100km" (fuel litres per 100 km),
with an accuracy of 0.1 km/l.
Range shows the distance in km that
the car can still cover before needing
fuel, assuming that driving style is un-
varied. The travel distance to empty
calculated depends on the amount of
fuel still in the tank and on the aver-
age consumption rate. At starting the
on-board computer shows the last
value measured before turning off.
The updated value will be displayed
30 seconds after the engine is started
or the on-board computer is reset.