Table of Contents
Advertisement
3
INTRODUCTION
The TLE Series 625 - 750 - 1000 Uninterruptible Power Supply (UPS) provides the energy supply for
critical loads which need a reliable, continuous free from voltage disturbances and frequency
fluctuations supply.
In case the power provided by the Utility Fails, or exceeds the permitted tolerances, the power to supply
the Load is provided by the Battery for the specified time at the rated Load (or longer at a reduced Load)
or until the Utility power returns.
TLE Series 625 - 750 - 1000 is a truly VFI double conversion Uninterruptible Power
Supply (UPS), equipped with automatic bypass, where the Load is normally supplied
by the Inverter.
If the Inverter is not able to supply the required Output Voltage, or when overload or
short-circuit on the output occur, the Load is instantly transferred to the Utility via
the Automatic Bypass.
The UPS automatically returns to normal mode when the failure condition is
restored.
TLE Series 625 - 750 - 1000 can be configured, if chosen, for the eBoost™ Operation
Mode (Option - High efficiency: up to 99% / Fast power transfer: <2ms) permitting
maximum energy saving.
KEY FEATURES:
More Critical equipment supported
Rated at 1 Power Factor, TLE Series 625 - 750 - 1000 delivers more real power than other UPS in the
market.
With today's trend toward power factor corrected loads, TLE Series 625 - 750 - 1000 can support more
total Load than any other UPS available, allowing you to support a greater number of today's enterprise
computing Power Factor Corrected (PFC) equipment.
High Efficiency
Thanks to type Advanced Neutral Point Clamped three level IGBT technology, TLE Series 625 - 750 - 1000
guarantees a high overall performance.
Intelligent Energy Management (IEM) combined with RPA, results in the most cost efficient and reliable
UPS solution in the industry.
Fully digital
Digital Signal Processor (DSP), Flash memory and Advanced Neutral Point Clamped are the technology
corner stones of a new age of power quality and power reliability.
RPA™ - Redundant Parallel Architecture™ Parallel System
GE provides a unique technology called Redundant Parallel Architecture™ (RPA™) that can parallel
Uninterruptible Power Supply (UPS) modules with true redundancy.
With RPA™, there is no need for external electronics or switches to control the UPS modules in the
parallel system.
One of the UPS modules in the system arbitrarily takes a leadership role, while the other UPS modules
have access to all control parameters.
If one UPS fails to operate, the load is automatically redistributed among the others.
If the lead UPS fails to operate then a different UPS automatically takes on the leadership role.
The RPA™ systems are designed to have no single points of failure, ensuring the highest level of power
protection for critical loads.
Extremely flexible
Tailor made power protection to meet your individual installation requirements; TLE Series 625 - 750 -
1000 offers various options like EMC filter and our comprehensive software for mission control and data
protection to cover all your application needs.
Modifications reserved
GE_UPS_USM_TLE_SUL_M62_1M0_2US_V010.docx
Critical Power
Page 11/92
User Manual TLE Series 625 - 750 - 1000 UL S2
Advertisement
Table of Contents
