Connecting The Embroidery Module - Bernina Artista 165 User Manual

Connecting the adapter for free arm embroidery (optinal ass.)
008904.55.04_EMB_0401_a165 a170 a180_EN

Connecting the embroidery module

The adapter is used for embroidering tubular items
(sleeves, trousers, socks, etc.) on the free arm of the
sewing computer.
Attaching the adapter to the sewing computer
· remove the sewing computer accessory box
· place the adapter on the sewing computer behind the
free arm
· push the adapter towards the sewing computer from
the left so that the connecting lugs engage in the base
plate of the sewing computer
Attaching the module to the adapter
· place the module on the adapter with the front edge of
the module as close as possible to the L-shaped raised
guide on the adapter
· push the module towards the guide from the left until
the connecting lugs engage in the base plate of the
adapter
Free arm embroidery hoop (optinal ass.)
· the small, oval embroidery hoop is specially designed
for free arm embroidery
Note:
· only the small hoop can be used for free arm
embroidery
· only the small hoop will produce perfect motifs
Removing the adapter
· remove the module from the adapter
· the rear right corner of the adapter is designed to be
used as a grip
· hold the adapter with this grip and remove from the
base plate of the sewing computer
7