Starting To Embroider; Using Motifs With Functions - Bernina Artista 165 User Manual

22 Starting to embroider/Motifs and functions

Starting to embroider

Using motifs with functions

Starting to embroider with the quick
reverse button
· lower the presser foot
· press the quick reverse button on
the head frame (approximately 3
seconds will elapse until the audio
signal stops)
Starting to embroider with foot
control
· lower the presser foot
· press the foot control
· the sewing computer will stop
automatically after a few stitches
(approx. 6)
· release the foot control
· raise the presser foot
· cut the thread tail
Complete the color
· lower the presser foot
· press the foot control or quick
reverse button
· the sewing computer embroiders all
the sections in the color selected
and stops automatically when
complete
Color change
· the sewing computer is
automatically ready to embroider
the next color
· change the upper thread
accordingly
· embroider as described above
All motifs can be combined with the
various functions integrated in the
embroidery module. You can alter
008904.55.04_EMB_0401_a165 a170 a180_EN
· the sewing computer will automati-
cally sew approximately 6 stitches
and stop
· raise the presser foot
· cut the thread tail
· lower the presser foot
· press the quick reverse button to
resume sewing
· lower the presser foot
· continue embroidering by pressing
the foot control
Interrupting with the foot control
· when the sewing computer is
embroidering, tap the foot control
lightly
· the sewing computer will stop
automatically
Cutting thread ends after embroidery
· raise the presser foot
· remove the embroidery hoop from
the embroidery arm
· cut threads close to the embroidery
· carefully remove any connecting
threads from the embroidered area
if necessary
· Take care that the bobbin thread is
not cut too tightly on the stitch
plate when removing the embroi-
dery hoop. This prevents tangling
when starting again.
the color sequence, rotate motifs,
adjust the stitch density, etc.