Embroidery Screen - Bernina Artista 165 User Manual

Embroidery screen

Change the color sequence
Embroidery screen
· after selecting a motif, the embro-
idery screen with color selection and
sequence appears
· the selected motif appears in the
large section of the screen
· the following information appears
on the screen
· presser foot
· design number
· embroidery time
· finished size (in millimeters)
· touch "Layout 1" or "Layout 2" =
switch between layout screens
several functions can be
combined with the motif
· "menu" opens the embroidery
module menu
· the number of the color to be
embroidered is shown on the left
(large)
· use the arrows to scroll the color
sequence of the motif
· the total number of colors for the
motif selected is on the right (small)
· the sections for the color to be
embroidered are in black on the
screen
Color sequence
· use the arrows to scroll through the
color sequence of the motif
· the total number of colors for the
motif selected is shown on the right
(small)
· the number of the current color is
shown on the left (large)
· the sections for the color to be
embroidered are shown in black on
the screen
Manual sequence
· scroll the color sequence until you
reach the area of your choice, e.g.
color 4
· embroider the color, the machine
stops automatically
· scroll to the next color, e.g. 6
· embroider
· continue until the motif is complete
008904.55.04_EMB_0401_a165 a170 a180_EN
Motifs and functions
· the remaining sections appear gray
on the screen
· the cursor indicates the starting
point of a particular color
· touch the brush symbol to embroi-
der the motif in one color (no color
changing stop)
· touch sequence control to control
the embroidery sequence and move
forward or backward in small steps
· touch the hoop relocater symbol to
move the frame horizontally into the
center for easier threading.
· touch "M –"or "M +" = the em-
broidery speed will be reduced or
increased proportionately.
Size changes, mirror image, rotations
· the embroidery motif always
appears in its original form in the
normal embroidery screen
· size changes are not shown on the
screen
· the size is shown in millimeters
· mirror images and rotations are not
shown on the screen unless "show"
(in layout) is selected
· any alterations which have been
made can be viewed at any time in
either of the layout screens
· the remaining sections appear gray
on the screen
· the cursor indicates the starting
point of a particular color
· when scrolling backward through
the color sequence, the end of the
previous color is always shown:
the large number on the left in the
rectangle changes from black to
gray.
For instance:
When changing from color 6 to 4,
the left arrow must be pressed until
the number 3 appears in gray. Then,
press the right arrow once and the
number 4 appears in black. Now
color 4 can be embroidered.
23