Table of Contents
Advertisement
3.
In the dialog box, enter the Target Name in the field provided.
Check the boxes of the Target IP addresses you want to use.
From the Access Mode dropdown menu, choose a level of user access.
Click the Next button to continue.
The Select virtual drives for LUNs in the Target dialog box opens.
4.
In the dialog box, check the boxes corresponding to the Resources you wan
to use.
Check the Assign all the group members to client box, as desired.
Click the Next button to continue.
The Assign LUN to Target dialog box opens.
5.
In the dialog box, choose a Starting LUN from the menu.
The default LUN number is 0 (zero).
Click the Next button to continue.
The Verify iSCSI Target Properties dialog box opens.
6.
In the dialog box, verify the information and click the Finish button.
A success message displays.
7.
In the message, click the OK button.
The new SAN resource
which you assigned it.
8.
On the client system, in the Microsoft iSCSI Initiator target pane, choose the
target and log in.
9.
Under Computer Management, click Disk Management and verify that the
target storage appears among the Disks.
If the target storage is not visible under Disk Management, from the Action
menu, choose Rescan Disks.
Partitioning and Formatting the Storage
The logical drive must be partitioned and formatted to work with the SAN client's
operating system. On a Windows client, you might have to do a disk rescan.
Under Computer Management, right-click Disk Management and choose
Rescan Disks in the popup menu.
When you initialize the disk, choose:
•
MBR – Up to 2 TB of storage
•
GPT – Over 2 TB of storage
appears in the Tree under the SAN client
61
Task 12: Setting-up Basic Storage
to
Advertisement
Table of Contents
