Sekonic SR-1800 Operating Manual page 55

SR-1800
[Direct under type card (1/6" IBM card size)]
A A
11.43 11.43
3.8±0.1 3.8±0.1
Standard size Standard size
0.1 0.1
General tolerance ±0.2 General tolerance ±0.2
* Cut corners and round corners
They help you to easily check if the sheet is placed in the right direction, and help you to
manage the sheet and keep it orderly.
Cut sheet corners straight or rounded according to the specifications shown below.
Straight cut corners: standard 6mm or less.
Chamfer angle 45°
Round corners: R 6mm
v
0.2 A 0.2 A
82.55 82.55
4.23 x 15=63.45 4.23 x 15=63.45
4.23 4.23
3.5-4.3 3.5-4.3
0.2 A 0.2 A
6mm 6mm
45 45
(6mm) (6mm)
R 6mm R 6mm
0.2 A 0.2 A
Cut corner (*) Cut corner (*)
0.2 A 0.2 A
[Unit: mm] [Unit: mm]