Operation; Operation Flow; Turning Power On/Off; Turning Power On - Sekonic SR-1800 Operating Manual

Operation

Operation Flow
Power on Power on
Set sheets Set sheets
Reading sheets Reading sheets
Power off Power off
Turning Power On/Off
Turning Power On
1
(1) Turn the power switch to ON position.
Power is turned on and the self-check begins. Then the READY lamp (green) and ERROR
lamp (red) light up.
When the self-check is completed normally, the buzzer sounds "Pip!" and the ERROR
lamp turns off. Only the READY lamp turns on, indicating that the device is able to
communicate with the computer.
Power Switch Power Switch
Turning Power Off
2
(1) Turn the power switch to OFF position.
Reference: "Checksheet Reading Test" (P.32) Reference: "Checksheet Reading Test" (P.32)
Reading Checksheets Reading Checksheets
If necessary, read the checksheet and make sure there are no If necessary, read the checksheet and make sure there are no
errors. (After the test, make sure to turn the power off.) errors. (After the test, make sure to turn the power off.)
ON ON OFF OFF
SR-1800