Sekonic SR-1800 Operating Manual page 31

SR-1800
CAUTION
· Be careful not to bend, fold, or damage the sheets. Doing so may result in a sheet feeding
error or reading error.
· Make sure to loosen the sheets before using them. Double feeding may occur if they are
stuck to each other due to static electricity, burr, etc.
Adding sheets:
When adding sheets, lower the hopper and make sure to reset the sheets. Not doing so may
result in a feeding error.
Maximum Hopper Capacity:
50 sheets, paper weight 90kg (weight by area: 105g/m
CAUTION
Overloading sheets onto the hopper may result in sheet feeding and reading errors.
Sheet Size:
This device can use the sheet between 110mm and 335.6mm (4.3 inches to 14 inches) long,
and between 63.5mm and 228.6mm (2.5 inches to 9 inches) wide.
The length of the sheet must be at least 1.3 times the width.
The paper quality must be "OCR Paper" and the paper weight must be 72 to 135kg (83.8 to
157 g/m ).
2
CAUTION
Do not use sheet other than those with the specified size, quality, and weight.
0
).
2