Inspecting Sheets - Sekonic SR-1800 Operating Manual

Inspecting Sheets

Inspect sheets according to the following procedure to make sure there are no problems.
(1) Checking for dirty or damaged sheets
Check that the sheets are free from any dirt, rumples, folds, folding lines, turn-over, tears
or bending. Do not make the device read sheets in which tears were mended with adhesive
cellophane tape, etc.
If the above operation is forced, it will lead to a reading error, sheet jam, no feed or double
feed.
Example:
Warp Warp
Bend Bend
Rumple Rumple
(2) Removing foreign materials
Check that the sheets are free from any foreign materials such as rubber eraser refuse,
paperclips, adhesive cellophane tape, staples, rubber bands and correction liquid.
If the device is forced to read sheets with such foreign materials, it will lead to a reading error
or sheet jam. Also, it may result in damage to the feeder lens.
Adhesive Adhesive
cellophane tape cellophane tape
Tear Tear
Turn-over Turn-over
Fold Fold
Turn-over Turn-over
Dirt Dirt
Staple Staple
Adhesive Adhesive
cellophane tape cellophane tape
Fold Fold
Folding line Folding line
SR-1800