File Menu (Alt-F); Options Menu; Help Menu - Tektronix Phaser 360 Service Manual

6
Troubleshooting
6-42 Phaser 360 Color Printer

File Menu (Alt-F)

This menu controls the saving and loading of test selection sequences, described
above.
New – creates a new test selection sequence (deselects all tests and
erases their previous completion codes).
Open – opens an existing, previously saved file.
Save – saves the current test selections in the "current" file. If the
selection sequences is new (never been saved) the user is prompted to
specify a file name.
save As – saves the current test selections in a particular file.
eXit (Alt-X) – exit the diagnostic program.

Options Menu

Provides for customizing of program operation. This menu contains some
sub-menus.
"CommPort" – provide for changing the baud rate of the link and for
changing the communication port used. The default baud rate is 19.2
k, which is the maximum rate supported by a Apple PowerBook host.
Other diagnostic hosts support rates up to 57k. When ever the printer
is reset or power-cycled, it baud rate resets to 19.2 k.

Help Menu

The system includes limited On-line help. Most of the really useful help
pertains to the tests themselves and is available via the Tests menu.
About – gives the program version and other statistics about its
operation.
Usage overview – gives the user an overview of the system and
explains running the first test.
F1 – describes an individually highlighted test.