Kyocera FS-6525MFP Service Manual page 61

Item No.
U034 5. Change the setting value using the cursor left/right keys or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
Leading edge
registration
(20 ± 1.5 mm)
6. Press the start key. The value is set.
Remark
When changing the setting value of [Large] each item is modified, equal to amount of the value
which is changed adds also the value of [Small] each item and is pulled.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
U034
Adjustment: Center line adjustment
1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
Display
MPT
Cassette1
Cassette2
Cassette3
Duplex
Description
Correct image
Figure 1-3-2
U066 U071
( P.1-3-29) ( P.1-3-34)
Description
Paper feed from MP tray
Paper feed from cassette 1
Paper feed from optional
cassette 2
Paper feed from optional
cassette 3
Duplex mode (second)
1-3-21
Output Output
example 1 example 2
Setting
range
-128 to 127 0
-128 to 127 0
-128 to 127 0
-128 to 127 0
-128 to 127 0
2MW/2MX
Initial Change in
setting value per step
0.1 mm
0.1 mm
0.1 mm
0.1 mm
0.1 mm