Adjusting The Dp Scanning Timing; Adjustment: Leading Edge Registration - Kyocera FS-6525MFP Service Manual

Item No.
U071

Adjusting the DP scanning timing

Description
Adjusts the DP original scanning timing.
Purpose
Make the adjustment if there is a regular error between the leading or trailing edges of the origi-
nal and the copy image when the DP is used.
Method
1. Press the start key.
2. Press the system menu key.
3. Place an original on the DP and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.l
Display
Front Head
Front Tail
Back Head
Back Tail

Adjustment: Leading edge registration

1. Change the setting value using the cursor left/right keys or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
2. Press the start key. The value is set.
Caution
If the first side is adjusted, check the second side and if adjustment is required, carry out the
adjustment.
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
U071
Description
Description
Leading edge registration
(first side)
Trailing edge registration
(first side)
Leading edge registration
(second side)
Trailing edge registration
(second side)
Original
Figure 1-3-11
U404
( P.1-3-62)
1-3-34
Setting
range
-80 to 80
-80 to 80
-80 to 80
-80 to 80
Copy Copy
example 1 example 2
2MW/2MX
Initial Change in
setting value per step
0 0.119 mm
0 0.119 mm
0 0.119 mm
0 0.119 mm