1-5-5 Drum section
(1) Detaching and refitting the drum unit
Procedure
1. Open the front cover. (See page 1-5-3)
2. Release the waste toner box.
(See page 1-5-16)
3. Release the lock lever and then open
the developing cover.
(See page 1-5-17)
4. Open the right cover 1.
(See page1-5-11 )
5. Release the lock lever (yellow) and then
remove the drum unit.
6. Check or replace the drum unit and refit
all the removed parts.
(2) Detaching and refitting the chager roller unit
Procedure
1. Remove the drum unit.
(See page 1-5-19)
2. Release the lock lever and then remove
the chager roller unit.
3. Check or replace the chager roller unit
and refit all the removed parts.
Drum unit
Figure 1-5-31
Drum unit
Figure 1-5-32
1-5-19
2MW/2MX
f
Lock lever(yellow)
Lock lever
Chager roller unit