Refitting The Isu - Kyocera FS-6525MFP Service Manual

Refitting the ISU

7. When re-installation, fix the image
scanner unit by matching to the scale of
a former position.
When exchange, decide the fix position
of ISU by the following.
The right and left of machine:
Confirm the number marked (a) and
then match the line (c) of ISU to the
positioning line (b) of same number on
frame side.
(Line (c) is the one which is marked with
the appropriate number.)
The rear and front of machine:
Match the edge (e) of ISU to the posi-
tioning line (d) on frame side.
8. Fix the ISU as before with four screws.
9. Check or replace the image scanner
unit and refit all the removed parts.
Figure 1-5-43
1-5-26
2MW/2MX
ISU
e
d
c
a
c
b