2-1-5 Transfer/Separation section
The transfer and separation section consists mainly of the transfer roller, separation electrode and drum sep-
aration claws.
A high voltage generated by the high voltage PWB (HVPWB) is applied to the transfer roller for transfer charg-
ing.
Paper after transfer is separated from the drum by applying separation charging that is output from the high
voltage PWB (HVPWB) to the separation electrode.
1. Drum
2. Transfer roller
3. Paper chute guide
Separation needle
Transfer roller
1
3
Figure 2-1-16 Transfer/Separation section
Separation bias
Transfer bias
Figure 2-1-17 Transfer/Separation section block diagram
5
4
2
4. Separation needle
5. Drum separation claws
HVPWB
TRA_CNT
YC10-8
SEP_REM
YC10-9
SEP_SEL
YC10-10
2-1-12
2MW/2MX
EPWB
YC10-8
YC10-9
YC10-10