Kyocera FS-6525MFP Service Manual page 164

Code
0000 Initial jam
0100 Secondary paper feed
request time out
0101 Waiting for process package
to be ready
0104 Waiting for conveying pack-
age to be ready
0106 Paper feeding request for
duplex printing time out
0107 Waiting for fuser package to
be ready
0110 Right cover open
0111 Front cover open
0120 Receiving a duplex paper
feeding request while paper
is empty
0121 Exceeding number of duplex
pages circulated
0210 Right lower cover open
0501 No paper feed from cassette
1
0502 No paper feed from cassette
2
0503 No paper feed from cassette
3
0508 No paper feed from duplex
section
0509 No paper feed from MP tray
0511 Multiple sheets in cassette 1
0512 Multiple sheets in cassette 2
0513 Multiple sheets in cassette 3
0518 Multiple sheets in duplex
section
0519 Multiple sheets in MP tray
*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).
Contents
The power is turned on when a sensor in the con-
veying system is on.
Secondary paper feed request given by the con-
troller is unreachable.
Process package won't be ready.
Conveying package won't be ready.
Paper feeding request for duplex printing given by
the controller is unreachable.
Fuser package won't be ready.
The right cover is opened during printing.
The front cover is opened during printing.
Paper feed request was received from the duplex
section despite the absence of paper in the duplex
section.
The controller issued the duplex section a request
for more pages than the duplex print cycle con-
tains.
The right lower cover is opened during printing.
The registration sensor (RS) does not turn on dur-
ing paper feed from cassette 1.
PF feed sensor 1 (PFFS1) does not turn on during
paper feed from cassette 2 (Retry 1 times).
PF feed sensor 2 (PFFS2) does not turn on during
paper feed from cassette 3 (Retry 1 times).
The registration sensor (RS) does not turn on dur-
ing paper feed from duplex section.
The registration sensor (RS) does not turn on dur-
ing paper feed from MP tray.
The registration sensor (RS) does not turn off dur-
ing paper feed from cassette 1.
PF feed sensor 1 (PFFS1) does not turn off during
paper feed from cassette 2.
PF feed sensor 2 (PFFS2) does not turn off during
paper feed from cassette 3.
The registration sensor (RS) does not turn off dur-
ing paper feed from duplex section.
The registration sensor (RS) does not turn off dur-
ing paper feed from MP tray.
Conditions
1-4-2
2MW/2MX
Jam
location*
-
F
F
F
F
-
-
-
G
G
-
A
B
C
G
D
A
B
C
G
D