Loading An Original Document On The Document Glass - Fuji Xerox DocuPrint M215 b User Manual

 Loading an Original Document on the Document Glass
1
Open the document cover.
2
Place the document face down on the document glass and align it with the registration guide on
the top left corner of the document glass.
CAUTION:
• Do not apply excessive force to hold thick document on the document glass. It may break the
glass and cause injuries.
3
Adjust the document resolution, referring to
4
Close the document cover.
NOTE:
• Ensure that no document is in the ADF. If any document is detected in the ADF, it takes priority over the
document on the document glass.
• If you are faxing a page from a book or magazine, lift the document cover until its hinges are caught by the
stopper and then close the document cover. If the book or magazine is thicker than 20 mm, start faxing with
the document cover open.
"Resolution" on page
Faxing (DocuPrint M215 fw Only)
285.
284