Using an Answering Machine
Printer
To the
wall jack
You can connect a telephone answering device (TAD) directly to the back of your printer as shown
above.
•
Set your printer to Ans/FAX Mode and set Auto Ans. Ans/FAX to specify the time for the
TAD to respond.
•
When the TAD picks up the call, the printer monitors and takes the line if fax tones are received
and then starts receiving the fax.
•
If the answering device is off, the printer automatically goes into the fax receive mode after the
ring tone sounds for a predefined time.
321
Faxing (DocuPrint M215 fw Only)
Line
Telephone Answering Device
Phone