Fuji Xerox DocuPrint M215 b User Manual page 82

24
Turn off and turn on the printer.
See also:
• "Operator Panel" on page 47
The Printer Setting Utility
The following procedure uses Windows 7 as an example.
1
Click start All Programs
→
your printer Printer Setting Utility.
→
NOTE:
• The window to select a printer appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2
Click the Printer Maintenance tab.
3
Select TCP/IP Settings from the list at the left side of the page.
The TCP/IP Settings page is displayed.
4
Select Panel from IP Address Mode, and then enter the values in IP Address, Subnet Mask,
and Gateway Address.
5
Click the Restart printer to apply new settings button to take effect.
81 Printer Connection and Software Installation
Fuji Xerox Fuji Xerox Printer Software for Asia-Pacific
→ → →