Collated - Fuji Xerox DocuPrint M215 b User Manual

 Collated
You can sort the copy output. For example, if you make two copies of three page documents, one
complete three page document will print followed by the second complete document.
NOTE:
• Copying documents with a large amount of data may exhaust available memory. If a memory shortage occurs,
cancel the collating by turning Collated to Off on the operator panel.
1
For the DocuPrint M215 fw, load the document(s) face up with top edge in first into the ADF or
place a single document face down on the document glass, and close the document cover.
For the DocuPrint M215 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M215 fw Only)" on page 208
• "Making Copies From the Document Glass" on page 206
2
Press the Copy button.
3
Select Collated, and then press the
4
Select the desired setting, and then press the
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
Off*
On
Auto
5
If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 209
6
Press the (Start) button to begin copying.
button.
button.
Does not sort the copy job.
Sorts the copy job.
Automatically determines which output mode for the copy job.
Copying 216