Random Spots/Blurred Images - Fuji Xerox DocuPrint M215 b User Manual

 Random Spots/Blurred Images
Problem
The printed result has random
spots or is blurred.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
405 Troubleshooting
Action
Ensure that the toner cartridge is installed correctly.
See also:
• "Installing a Toner Cartridge" on page 450
If you use a non-genuine brand toner cartridge, install a genuine
brand toner cartridge.
Clean up the fusing unit.
1 Load one sheet of paper on the MPF, and then print a solid image
all over paper.
2 Load the printed sheet with the side to be printed on facing down,
and then print a blank sheet of paper.