Table of Contents
Advertisement
8.1.4 Cleaning the Burn Pot
The burn pot must remain clean and the holes should not be obstructed by combustion
residues (ashes or clinkers).
1. Clean the burn pot using the scraper provided with the stove or a smaller one.
2. The burn pot simply sits onto the air intake channel. You must lift to remove it from the
stove. Two small pins guide the burn pot in place. Make sure that the burn pot is well in
place before turning on the stove (as shown in the diagram).
44
Euromax Pellet Stove Installation and Operation Manual
Advertisement
Table of Contents
