Table of Contents
Advertisement
ACCESS PANELS
Figure 7
Access panel
FILTERS INSTALLATION AND CLEANING
The two filters for your convection blowers are supplied with the owner's manual. Although the filters are not mandatory, they are useful to prevent dust
from being dispersed into the room where the stove is located. If you install the filters, please make sure that they are cleaned on a regular basis as per
our recommended maintenance schedule. This is particularly critical if you have animals in your house, such as a dog or a cat. Filters that are not
cleaned can clog up and cause your stove to overheat. You may also damage or burn the convection blowers. In order to install the filters, simply insert
them in the slot just above the blower's finger guard. To clean the filters, use a vacuum or remove the filters and rinse them with hot water.
1- The stove has two access panels
ACCESS PANEL
DOOR LEVER
8
located on each side in order to
access the unit's various
components. In order to open the
panels, simply pull on the lever
located underneath the top access
panel.
Advertisement
Table of Contents
