Table of Contents
Advertisement
APPENDIX E: MOBILE HOME INSTALLATION
Anchor the stove
WARNING: FOR MOBILE HOME INSTALLATION, IT IS MANDATORY TO CONNECT THE
STOVE TO AN OUTSIDE COMBUSTION AIR SOURCE. (SEE APPENDIX F)
When installed in a mobile home, the stove must be anchored to the floor with two screws.
Use the two anchoring holes (A) located for this purpose on each side of the pedestal, as
shown on the following image.
For use in a mobile home in Canada, this pellet stove must be connected to a vent system certified
according to the standard or ULC/ORD-C441 CAN/ULC-S609. A vent system meeting the
requirements of ULC S629M can also be used.
For use in a manufactured home in the United States, this pellet stove must be connected to a venting
system that meets the requirements of UL 641 standard. A vent system that meets the requirements
of UL 103 standard may also be used.
93
Euromax Pellet Stove Installation and Operation Manual
Advertisement
Table of Contents
