Changing Or Deleting A Title - Kenwood XD-980MD Instruction Manual

Changing or deleting a title

Total number of title characters
Up to 1792 characters can be input per disc and up to 80 charac-
ters can be input per track.
A space (blank character) also require the same amount of data
as alphanumeric characters. When deleting a title, it is not rec-
ommended to overwrite spaces on previous characters but use
the DELETE function.
1
Perform step 1 of "Assigning a title to a disc or track".
2
Change or delete characters one by one.
1 Move the cursor to the desired char-
acter (the character to be changed).
2 Select the character group.
1 1,¡ (L CURSOR R) key
REC INPUT DELETE
7 8
1
7 (CHARACTER
SPACE) key
DELETE (CHARACTER DELETE) key
3 Select the correct character.
4 Confirm the character.
All characters of a title can be changed by repeating steps 1 to 4.
3
Execute title change or deletion.
1 Enter the title in memory.
2 Complete the operation.
2 CHARAC. (TRACK EDIT/
CHARA.) key
TITLE INPUT
0
QUICK
3
¡
MOVE
3 Jog dial
4 SET key
TITLE INPUT
Always remove the minidisc after title input or editing. The
names in brackets in the explanations are the names of the re-
mote control keys.
Title input section
K E N W N O O
Cursor
In regard to the key functions
DISPLAY MODE key :
The characters can be scrolled in units of five characters.
CHARAC. (TRACK EDIT/CHARA.) key :
The group of characters displayed at the character selec-
tion section is switched.
DELETE (CHARACTER DELETE) key :
The character at the cursor is deleted (erased) and the
following characters move up by one character each.
Titles can be erased easily by continuous pressing (or by
holding the key down for repeated input).
7(CHARACTER SPACE) key :
A space (blank corresponding to one character) is entered
(inserted) directly before the character at the cursor
position, and the following characters all are moved back
by one character. Continuous pressing (or repeated input
by keeping the key pressed) also is possible. This is used
mainly to provide space for adding characters to a title.
If the title to be changed is too long to be displayed on the display
section, press the 1 1 , ¡ 1 1 1 ¡ (L CURSOR R) key to scroll the ¡ ¡ ¡
display so that the characters hidden until then appear.
When the jog dial is turned, the display scrolls and all charac-
ters (in the same group) can be selected.
The playback (3) key can also be used to erase characters.
D I S C S T O R
D I S C K E N
MD Edit Functions
XD-980MD (En)
R
TITLE
L
30 10 5 3 1
R
TITLE
E L
30 10 5 3 1
R
TITLE
W O L
30 10 5 3 1
R
The title scrolls.
5 5
( dB)
0
( dB)
0
( dB)
0