12) Paper Source
13) Symbol set
Setting up the Raw Job Setting
In Raw Job Setting, you can add up to 16 LPR queue names and specify the raw job setting for
each queue. These queue names can be used when printing without a printer driver, such as
printing from Unix workstation.
You can add, edit, or delete a LPR queue.
Adding or Editing a LPR queue
88
Select the paper source that applies to a raw job.
Select the symbol set that applies to a raw job.
P.88 "Adding or Editing a LPR queue"
P.89 "Deleting a LPR queue"
1.
To add a new LPR queue, click [Add] in Raw Job Setting.
To edit an existing LPR queue, select a radio button of a
queue that you want to edit and click [Edit].
•
The Add New LPR Queue page is displayed.
2.
Enter following items as required.
Queue Name — Enter the queue name using up to 31 alphanumeric characters.
The queue name is case sensitive so that "Queue1" and "queue1" will be added
as different queues.
Raw jobs - Duplex Printing — Select whether a raw job will be printed on both
sides of the paper.
Network Administrator's Guide — Setting up Printer Settings