Setting up Printer Settings
In the Printer submenu page in the Setup menu, an administrator can configure how the printer
works and the printer options needed for the raw print jobs.
Setting the Printer settings
Network Administrator's Guide — Setting up Printer Settings
For e-STUDIO450 Series and e-STUDIO280 Series:
The Printer submenu page in the Setup menu is available only when the Printer Kit or the
Printer/Scanner Kit is installed.
1.
Access TopAccess in the administrator mode.
P.15 "Accessing TopAccess Administrator Mode"
2.
Click the Setup menu and Printer submenu.
•
The Printer submenu page is displayed.
3.
In the Printer submenu page, set the Printer settings as
required.
•
To set the Printer Settings, see the following:
P.86 "Setting up the General Setting"
P.86 "Setting up the Default Raw Job Setting"
P.88 "Setting up the Raw Job Setting"
4.
Click [Save].
•
The confirmation dialog box appears.
85