Setting Up The Ipp Print; Setting Up The Ftp Print - Toshiba e-studio 3511 Network Administrator's Manual

Setting up the IPP Print

In IPP Print, you can set the IPP Print options to enable the IPP print service.
1
2
3
4

Setting up the FTP Print

In FTP Print, you can set the FTP Print options to enable the FTP print service.
1
2
3
4
92
3) Banners
Select whether printing a banner page for each print job using LPR printing.
1) Enable IPP
Enable or disable IPP print service.
2) Port80 Enabled
Enable or disable the Port80 for IPP printing. Port631 is usually used for the IPP access so
users must specify to the URL, i.e. "http://<IP address or DNS name>:631/Print", for the IPP
port. When this is enabled, this equipment allows IPP access through the Port80, which is
the default port for the HTTP access so users do not have to specify the port number in the
IPP port, i.e. "http://<IP address or DNS name>/Print".
3) Port Number
If enabling the IPP, enter the IPP port number. Generally "631" is used.
4) URL
Display the URL for IPP printing. You cannot change the URL for IPP printing. This URL
should be set as the print port when users set up the printer driver for IPP printing.
1) Enable FTP Printing
Enable or disable FTP print service.
2) Port Number
Enter the FTP port number for FTP printing. Generally "21" is used.
3) Print User Name
Enter the user name who attempt FTP printing. If you leave this field blank, FTP printing
will be disabled.
4) Print Password
Enter the password if you want to request the login password of users who attempt FTP
printing.
Network Administrator's Guide — Setting up Print Service Settings