Setup Flow For Fax Features; Setup Flow For Network-Fax - Toshiba e-studio 3511 Network Administrator's Manual

Setup Flow for Fax Features

This section describes the minimum setup flow to configure this equipment for Fax features.

Setup Flow for Network-Fax

Windows Server 2003
Using the N/W-Fax driver, users can send a document to this equipment as a print job. The
equipment then sends the job to the fax numbers (or Email addresses) specified by the user
through the Public Switched Telephone Network or the Internet.
To send a fax through the Public Switched Telephone Network, users must configure the equip-
ment accordingly.
When sending an Internet Fax, the equipment sends the document to the SMTP server and trans-
fers it to the Internet. (A DNS server is required for the SMTP server to transmit the document
into the Internet.)
System Requirements
The N/W-Fax driver is available for following computers:
36
For e-STUDIO4511 Series:
•
The fax transmission using the N/W-Fax driver is available only when optional Fax unit is
installed. The Internet Fax transmission using the N/W-Fax driver is available without
optional Fax unit.
For e-STUIO450 Series and e-STUDIO280 Series:
•
The fax transmission using the N/W-Fax driver is available only when the Printer Kit or
Printer/Scanner Kit is installed in addition to optional Fax unit.
•
The Internet Fax transmission using the N/W-Fax driver is available only when the Printer
Kit and Scanner Upgrade Kit are installed, or when the Printer/Scanner Kit is installed.
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Internet
Connecting to Internet
Printing a document
using N/W-Fax driver
Send a document as
Internet Fax to the Internet
via SMTP server
SMTP Server
Network Administrator's Guide — Setup Flow for Fax Features
Send a document as
fax document via
Public Switched Telephone
network
G3 Facsimile or
Internet Fax Device