Setup Flow For Onramp Gateway - Toshiba e-studio 3511 Network Administrator's Manual

Step 2: Setting up the TCP/IP and the HTTP Network Service to enable TopAc-
Step 3: Setting up the SMTP Network Service.
Step 4: Setting up the POP3 Network Service.
Step 5: Setting the Internet Fax Settings.

Setup Flow for Onramp Gateway

This equipment can convert received faxes into Emails and forward them to other Internet Fax
devices or client computers using Onramp Gateway transmission.
Network Administrator's Guide — Setup Flow for Fax Features
cess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel Display the
first time you use it, to make TopAccess available. Please see the User Functions Guide to
configure the TCP/IP and HTTP Network Service from the Touch Panel Display, or from
TopAccess.
P.53 "Setting up the TCP/IP"
P.58 "Setting up the HTTP Network Service"
You should specify the SMTP server to be used for sending an Internet Fax.
P.59 "Setting up the SMTP Client"
You should specify the POP3 service and the user account for this equipment, to receive
Internet Fax.
P.61 "Setting up the POP3 Network Service"
In the Internet Fax Settings, you should specify the from address and from name to enable
the Internet Fax transmission. Also you can specify the fragment size, and body text that
apply to the Internet Fax sent from this equipment.
P.84 "Setting up the Internet Fax Settings"
For e-STUDIO4511 Series:
The Onramp Gateway feature is available only when the optional Fax unit is installed.
For e-STUIO450 Series and e-STUDIO280 Series:
The Onramp Gateway feature is available only when the optional Fax unit, Printer Kit, and
Scanner Upgrade Kit are installed, or when the optional Fax unit and Printer/Scanner Kit are
installed.
39