Clutch Inspection - Yamaha MBK YQ100 Service Manual

V-BELT, CLUTCH AND
SECONDARY/PRIMARY SHEAVE
4-20
3. Loosen :
• Nut(Clutch carrier)
NOTE:
Install the secondary sheave to primary drive shaft
as shown, and hold the secondary sheave by
Universal Roter Holder
Flywheel holding tool :
90890-01235
CAUTION:
Do not remove the clutch securing nut yet.
If the nut is removed without compressing
the secondary sheave, it may jump and cause
injury.
4. Attach :
• Clutch spring holder
Clutch spring holder :
90890-01337
5. Remove :
• Clutch securing nut
6. Remove:
• Clutch assembly
• Clutch spring
• Secondary sliding sheave assy'
• Guide pins

CLUTCH INSPECTION

1. Inspect:
• Clutch shoes
Glazed parts→Sand with coarse sandpaper.
NOTE:
After using the sand paper, clean of the polished
particles with cloth.
ENG
to loosen the nut .