Yamaha MBK YQ100 Service Manual page 40

A Fix the wire harness on the frame bracket.
B Group all connection in this area.
C Pass the starter cable through the hole.
D Tight this bolt first.
E Tight this bolt first.
F Stop the cap on the handlebar end. Tight at 7 Nm (0.7 m.kg).
G Stop the grip on the handlebar projection.
H Pass the flasher light wire through the hole.
I Position the grip in regards of this switch.
F
E
G H
2-23
CABLE ROUTING
D
SPEC
I
C
B
A