Advertisement
PREDELIVERY INSPECTION
WARNING
After completing the installation, inspect the items as follows and check that there are no problems
before delivering the bicycle. Adjust controls and saddle height to the customer's satisfaction
according to this manual.
8 Handlebar orientation, height, angle, and tightening
8 Saddle orientation, height, angle, and tightening
* Check that the saddle is firmly fastened.
8 Various fittings adjusted to the customer's riding posture
* Including brake lever angle, fork suspension air pressure, etc.
8 Inspection of the wheels, hubs, and spokes
8 Tightening of the pedals
8 Tightening of the screws of each part
8 Brake performance
8 Shift changing operation
8 Looseness of the chain
8 Bell sound
8 Battery pack locking operation
* Check that the battery pack locks securely.
8 Check of battery pack and battery charger operation
8 Operation of the meter, switches, and drive unit
8 Light, brightness, and angle of the headlight
* Check that the headlight shines on the road approximately 33 ft. (10 m) ahead.
8 Installation state of the reflectors
8 Maximum tire air pressure
Front tire: 515 kPa (5.1 kgf/cm
Rear tire: 515 kPa (5.1 kgf/cm
2
, 75 psi)
2
, 75 psi)
– 14 –
PREDELIVERY INSPECTION
Advertisement
