Checking The Speedometer Gear Unit; Assembling The Front Wheel - Yamaha MBK YQ100 Service Manual

Table of Contents

Advertisement

FRONT WHEEL AND BRAKE DISC
LT
23 Nm (2,3 m.kg)
340004(a)
6-7
Brake disc bolt
23 Nm (2.3 m • kg)
d.Measure the brake disc deflection.
e.If out of specification, repeat the adjustment
steps until the brake disc deflection is within
specification.
f. If the brake disc deflection cannot be brought
within specification, replace the brake disc.
EAS00535
CHECKING THE SPEEDOMETER GEAR
UNIT
1.Check:
• Speedometer clutch
Bends/damage/wear → Replace.
2.Check:
• Speedometer drive gear
• Speedometer driven gear
Damage/wear → Replace the speedometer
gear unit.
EAS00539

ASSEMBLING THE FRONT WHEEL

1.Install:
• Wheel bearings
• Oil seals
a.Install the new wheel bearings and oil seals in
the reverse order of disassembly.
CAUTION:
Do not contact the wheel bearing inner race
or balls
. Contact should be made only
with the outer race
NOTE:
Use a socket that matches the diameter of the
wheel bearing outer race and oil seal.
CHAS
.

Advertisement

Table of Contents
loading

Table of Contents