Removing The Holder And Wick - Pitney Bowes DM200i series Operator's Manual

Removing the Holder and Wick

1. Pull up and remove
the holder and wick
from the moistener as
shown.
2. Separate the wick
from its metal holder.
Clean the wick in
plain water, and rinse
thoroughly.
3. Place the wick back into the holder.
4. Reinstall the wick and holder assembly into the moistener.
5. Reinstall the moistener. Push down on the blue release lever on
the moistener.
6. Slide the moistener back onto the machine. You should hear a
click as it engages.
SDC570H
7 • Maintenance
Holder
Wick
Release
Lever
7-9