Table of Contents
Advertisement
!
Disconnect power to the
machine when perform-
ing any maintenance,
assembly
ments. Failure to do this
may result in serious
personal injury.
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Wear safety glasses dur-
ing the entire assembly
process. Failure to com-
ply may result in serious
personal injury.
While the main components of the Shop Fox
W1676 are assembled at the factory, some
assembly is required. The following is the rec-
or
adjust-
ommended sequence best suited for final
assembly.
TOOLS REQUIRED (NOT INCLUDED): You will
need a 6" adjustable wrench, 12mm open-end
wrench, flathead screwdriver, Phillips
driver and 4mm Allen
-13-
General
®
wrench.
®
®
screw-
Advertisement
Table of Contents
