Create Fixed Host Mapping - Ericsson HM490dp User Manual

Advanced Setup
5.6.3

Create Fixed Host Mapping

You can add a fixed host mapping to the DHCP server c onfiguration. This
allows you to configure the DHCP server to assign a specific IP addaress to
a specific DHCP client based on the client's MAC addaress.
The lower part of the DHCP Server page includes settings for "Fixed
Hosts":
To create a new mapping click the Create link to view the following page:
Enter the IP address you want to assign and the unique MAC address of
the device. In the "Maximum lease time" field enter the time (in seconds)
you want the network device to lease the IP address before it is reassigned.
The default value is 86400 seconds (24 hours).
If your fixed mapping overlaps with an IP address in a dynamic address
range, then the fixed mapping will always supersede the dynamic address.
Click the
DHCP Server page where your fixed mapping is displayed in the lower part
of the window:
1553-ZAT 759 95 Uen C – July 2005
button to confirm your settings. You will now return to the
OK
71