Configure PCs
3
Your wireless network can now communicate with the Internet via the
HM490dp.
1553-ZAT 759 95 Uen C – July 2005
Configure the following wireless parameters on each of the wireless
PCs:
−
Set the adapter to use infrastructure mode. This configures the
PCs to access each other and the Internet via the device.
−
Configure the SSID and channel to match the SSID and channel
configured on the HM490dp.
−
If you are using Wired Equivalent Privacy (WEP) security,
configure the same network key that was previously configured on
the HM490dp.
−
If you are using Wi-Fi Protected Access (WPA) security, configure
the same pass phrase that was previously configured on the
HM490dp.
87