Table of Contents
Advertisement
Configuration Wizard
2
3
4
3.2.2
DHCP (MER)
The DHCP (MER) mode is a bridge-router access type meaning that the
HM490dp operates as a bridge to the WAN side while simultaneously
operates as a router to the LAN/WLAN side.
This access type is "Always On" meaning that you are automatically
connected to your ISP whenever you use your Internet connection. The
HM490dp automatically activates the NAT service that will route the traffic
to/from the WAN and its internal DHCP server that will assign private IP
addresses to the PCs on the LAN/WLAN.
1553-ZAT 759 95 Uen C – July 2005
Select DHCP (Ericsson-MER) and click the
following page appears:
Click the
Confirm Changes>
to exit the Wizard without any changes done.
No further settings for Internet Access has to be done and the next
page in the wizard is Wireless Network: Set Country. Continue to
section 3.2.9 – "Wireless Network Settings" to proceed.
Next>
button to save this setting or click
button. The
Cancel
13
Advertisement
Table of Contents
