Ericsson E1 Quick Start Manual
  1. Manuals
  2. Brands
  3. Ericsson Manuals
  4. Gateway
  5. E1
  6. Quick start manual
Ericsson E1 Quick Start Manual

Ericsson E1 Quick Start Manual

Hide thumbs Also See for E1:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick start guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E1 and is the answer not in the manual?

Questions and answers

Related Manuals for Ericsson E1

Summary of Contents for Ericsson E1

  • Page 1 Quick start guide...

  • Page 2: What's Included

    What's included Light arc E1 by Ericsson Power adapter Ethernet cable Gateway Router Hardware specifications: • 802.11AX tri-band router capable of 6000 Mbps theoretical maximum throughput • WAN broadband RJ-45 input • Two (2) LAN Ethernet RJ-45 ports...

  • Page 3: Connect The Power Supply

    Plug the power adapter into a power outlet, and plug the other end into the power port on the E1 Gateway Router’s WAN port. underside of the router. The router is ready to use when the light arc stops flashing and blue light begins pulsing on and off.
  • Page 4 The default password for all networks is: ericssonxxxx 1. Connect an Ethernet cable from the LAN port on the E1 Gateway Router to your computer, xxxx = Last four digits of the E1 Gateway Router’s serial number. (e.g. ericsson1234) or connect to the E1 Gateway Router via WiFi SSID.
  • Page 5 Enter or Return on your keyboard. Alternatively, you can search for: http://E[router-serial-number] (i.e. http://EDU00001234/ ) 1. Connect an Ethernet cable from the LAN port on the E1 Gateway Router to your computer, or connect to the E1 Gateway Router via WiFi SSID.

  • Page 6: Frequently Asked Questions

    Frequently asked questions 3. To change the network name, look for the Interface Confi guration section. There, under the How do I change the Wi-Fi SSID (network name) and password? General Setup tab, you will see a space labeled SSID where you can type in a new network name of your choosing.
  • Page 7 How do I confi gure LTE/5G? 4. To change the password, click the Wireless Security tab. There you will see a space labeled Key where you can type in a new password of your choosing. (Be sure to write it down in case you forget it later.) Log into advanced router settings, choose Network from the list on the left, then click LTE Confi...

  • Page 8: Reset To Factory Settings

    Reset to factory settings What do the lights on the E1 Gateway Router mean? There are two ways to reset the E1 Gateway Router to factory settings. Hardware method The E1 Gateway Router communicates its status using different LED displays.

  • Page 9: Update Firmware

    Reset to factory settings (cont’d) Check with E1 Customer Support to get a link to a validated router fi rmware image. Download the Interface method 1. Log into advanced router settings, choose System from the list on the left, then click Reboot/Reset.
  • Page 11 LZT 138 2288...

Table of Contents