Advanced Setup
7
8
5.5.6
Configure Custom Applications
If you want to enable access to an application that does not appear on your
device's default list, you can create a custom application.
In order to create a custom application, you must know:
•
•
•
•
1553-ZAT 759 95 Uen C – July 2005
enabled:
To disable an application, click the Disable application link. The
following page is displayed:
Select the application you want to disable from the drop-down list and
click the
button. A confirmation page is displayed where you
Next>
click the
Confirm Changes
The protocol used by the application (e.g. TCP, UDP and so on).
The primary port or range of ports used by the application.
Whether the application requires a trigger and if so, the secondary port
or range of ports used by the application.
The address translation type used by the trigger.
button.
63